SSP-3100 DISCRIMINATOR

Check out the latest Customer Testimonial on the SSP here.

The SSP-3100 Digital Discriminator is a unique combination of Metal Detector and Magnetometer that works hand in hand to detect "Eddy Currents" and "Ferrous Metals". Using Pulse Induction technology you can quickly discriminate between Ferrous and Non-Ferrous metals. The Discriminator can detect larger objects buried approximately 15 feet (5M) deep with the 2x2 meter coil and approximately 10 feet (2.5M) deep with the 1x1 meter coil.

• Full Microprocessor Control
• Automatic Ground Balance (Auto Tuner)
• Manual Tuner
• Auto-Tracking
• DELAY Control
• New "Digital" Pulse Format

• Graphic Target Analyzing
• All Metal/Non-Motion Mode
• DEPTH control for Maximized Detection
• Back light
• 4 Different Size/Configuration Coils

• Working voltage: 12V. The detector turns off when the voltage becomes lower than the critical value.
• Continuous power consumption: min 110 mA(with no sound and light).
• Maximum power consumption: 180 mA.
• Working Frequency: 100 Hz.
• Sound Range: 0.2Hz - 2.0KHz.
• Battery: Rechargeable 1700mAh NiMH Battery.
• Charger Input: 110V AC, 60Hz.
• Charger Output: 17V DC.
• Battery Charging Time (empty): Max. 10 hours.
• Full Microprocessor Control.
• Automatic Ground Balance.
• Weight of control box (incl.battery): 24.69oz. (700 g).

• Auto Tracking.
• Manual Tuner.
• Delay control.
• Graphic Target Analyzing.
• Display: 32 x 122 pixel LCD module with back light.
• All Metal/No-Motion Mode.
• Audio and Visual Discrimination Mode (by built-in Magnetic/Induction Sensor).
• Depth Control for Maximized Detection Depth.
• Two Reset Controls for easy operation with both hands.
• Headphone Input: 1/4" Mono Jack.
• Possibility of using External Power Supply.
• Optimum Temperature Range: 0 - 50 Degrees C.